View STK433-130-E_6943901.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

n1109hkim no. a1596-1/11 STK433-130-E overview the STK433-130-E is a hybrid ic designed to be used in 150w 2ch class ab audio power amplifiers. applications ? audio power amplifiers. features ? pin-to-pin compatible outputs ranging from 80w to 150w. ? can be used to replace the stk433-000 series (30w to 60w /2ch) and stk433-200/-300 series (3-channel) due to its pin compatibility. ? miniature package (67.0mm 25.6mm 9.0mm) ? output load impedance: r l = 6 supported ? allowable load shorted time: 0.3 second ? allows the use of predesigned appli cations for standby and mute circuits. series models stk433-090-e stk433-100-e stk433-120-e STK433-130-E output 1 (10%/1khz) 80w 2 channels 100w 2 channels 120w 2 channels 150w 2 channels output 2 (0.4%/20hz to 20khz) 50w 2 channels 60w 2 channels 80w 2 channels 100w 2 channels max. rated v cc (quiescent) 54v 57v 65v 71.5v max. rated v cc (6 ) 47v 50v 57v 63v recommended operating v cc (6 ) 33v 35v 40v 44v dimensions (excluding pin height) 67.0mm 25.6mm 9.0mm ordering number : en*a1596 thick-film hybrid ic 2-channel class ab audio power ic , 150w+150w specifications of any and all sanyo semiconductor co.,l td. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' sproductsor equipment. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general el ectronics equipment (home appliances, av equipment, communication device, office equipment, industrial equ ipment etc.). the products mentioned herein shall not be intended for use for any "special application" (medica l equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, t ransportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of re liability and can directly threaten human lives in case of failure or malfunction of the product or may cause har m to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for app lications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. if there is n o consultation or inquiry before the intended use, our customer shall be solely responsible for the use.
STK433-130-E no. a1596-2/11 specifications absolute maximum ratings at ta=25 c (excluding rated temperature items), tc=25 c unless otherwise specified parameter symbol conditions ratings unit maximum quiescent supply voltage 0 v cc max (0) when no signal 71.5 v maximum supply voltage 1 v cc max (1) r l 6 62 v minimum operating supply voltage v cc min 10 v maximum operating flow-in current (pin 13) *7 ist off max 0.6 ma thermal resistance j-c per power transistor 1.6 c/w junction temperature tj max both the tj max and tc max conditions must be met. 150 c ic substrate operating temperature tc max 125 c storage temperature tstg -30 to +125 c allowable load shorted time *4 ts v cc = 44v, r l =6 , f=50hz, p o =100w, 1-channel active 0.3 s operating characteristics at tc=25 c, r l =6 , rg=600 , vg=30db, non-inductive load r l , unless otherwise specified conditions *2 ratings parameter symbol v cc (v) f (hz) p o (w) thd (%) min typ max unit p o (1) 44 20 to 20k 0.4 96 100 output power *1 p o (2) 44 1k 10 150 w thd (1) 44 20 to 20k 0.4 total harmonic distortion *1 thd (2) 44 1k 5.0 vg=30db 0.01 % frequency characteristics *1 f l , f h 44 1.0 +0 -3db 20 to 50k hz input impedance ri 44 1k 1.0 55 k output noise voltage *3 v no 53 rg=2.2k 1.0 mvrms quiescent current i cco 53 no loading 20 45 80 ma output neutral voltage v n 53 -70 0 +70 mv current flowing into pin13 in standby mode *7 ist on 44 0 ma current flowing into pin13 in operating mode *7 ist off 44 voltage at pin13: 5v, current limiting resistance r1: 13k 0.25 0.6 ma [remarks] * 1: for 1-channel operation * 2: unless otherwise specified, use a constant-voltage power supply to supply power when inspections are carried out. * 3: the output noise voltage values shown are peak values read with a vtvm. however, an ac stabilized (50hz) power supply should be used to minimize the influence of ac primary side flicker noise on the reading. * 4: use the designated transformer power supply circuit shown in the figure below for the measurement of allowable load shorted time and output noise voltage. * 5: please connect ?pre v cc pin (#1 pin) with the stable minimum voltage and connect so that current does not flow in by reverse bias. * 6: thermal design must be implemented based on the conditions under which the customer?s end products are expected to operate on the market. * 7: be sure to use the current limiting resistor to prevent the current flowing into the standby pin (pin13) never exceeds the maximum rated value in operating mode. the circuit is turned on by applying vbe (approximately 0.6v) or higher voltage to the standby pin (pin13). * 8: a thermoplastic adhesive resin is used for this hybrid ic. 10000 f 10000 f dba40c 500 500 +v cc -v cc + + designated transformer power supply (mg-200 equivalent)
STK433-130-E no. a1596-3/11 package dimensions unit:mm (typ) internal equivalent circuit 6 13 5 10 12 11 8 3 sub 9 bias circuit 14 15 pre driver ch1 pre driver ch2 2 1 7 4 + - + - 67.0 (r1.8) 9.0 5.0 25.6 20.8 4.0 16.0 60.0 2.9 5.5 14 2.0=28.0 3.6 2.0 (16.0) 0.4 0.5 115
STK433-130-E no. a1596-4/11 application circuit example sample pcb trace pattern 2 3 4 5 6 7 8 9 10 11 12 13 14 1 15 ch1 out gnd gnd +v cc -v cc STK433-130-E sub.gnd 100 /1w 100 3pf 56k 3pf ch2 out gnd 3 4.7 /1w 4.7 4.7 /1w 0.1 56k 470pf 2.2 1k +v cc ch1 in ch1 nf ch2 in ch2 nf ch2 out ch1 out -v cc sub gnd +pre st-by 0.1 10 stand-by control (v#13) ch1 out ch2 out -pre 100 /1w 100 0.22 c23
STK433-130-E no. a1596-5/11 stk433-100/stk433-300sr pcb parts list pcb name: stk403-000sr/100sr/200sr pcba location no. * 2ch amp doesn?t mount parts of ( ). parts rating component c hybrid ic#1 pin position - - stk433-100sr (*2) stk433-300sr r01 erg1sj101 100 ,1w enabled r02, r03 (r4) rn16s102fk 1k , 1/6w enabled r05, r06, r08, r09 (r 7, r10) rn16s563fk 56k , 1/6w enabled r11, r12 (r13) rn16s182fk 1.8k , 1/6w enabled r14, r15 (r16) rn14s4r7fk 4.7 , 1/4w enabled r17, r18 (r19) erx1sj4r7 4.7 , 1w enabled r20, r21 (r22) erx2sjr22 0.22 , 2w enabled c01, c02, c03, c23 100mv100hc 100 f, 100v enabled c04, c05 (c06) 50mv2r2hc 2.2 f, 50v enabled (*1) c07, c08 (c09) dd104-63b471k50 470pf, 50v enabled c10, c11 (c12) dd104-63c j030c50 3pf, 50v enabled c13, c14 (c15) 10mv10hc 10 f, 10v enabled (*1) c16, c17 (c18) ecq-v1h104jz 0.1 f, 50v enabled c19, c20 (c21) dd104-63b ***k50 ***pf, 50v 100pf 68pf r34, r35 (r36) rn16s302fk 3k , 1/6w short l01, l02 (l3) - 3 h enabled tr1 2sc3332 (reference) v ce 75v, i c 1ma enabled d1 gmb01 (reference) di enabled r30 rn16s***fk ***k , 1/6w 13k 2.7k r31 rn16s333fk 33k , 1/6w enabled r32 rn16s102fk 1k , 1/6w enabled r33 rn16s202fk 2k , 1/6w enabled stand-by control circuit c32 10mv33hc 33 f, 10v enabled j1, j2, j3, j4, j5, j6, j8, j9 - - enabled j7, js2, js3, js4, js5, js7 js8, js9 - - - js6, js10 - - enabled js1 erg1sj101 100 , 1w enabled ( * 1) capacitor mark ?a? si de is ?-? (negative). ( * 2) stk433-100sr (2ch amp) doesn?t mount parts of ( ).
STK433-130-E no. a1596-6/11 pin assignments [stk433-000/-100/-200sr & stk415/416-100sr pin layout] 123456789101112 13 14 15 2ch class-ab 2ch classab/2.00mm stk433-030-e 30w/jeita stk433-040-e 40w/jeita stk433-060-e 50w/jeita stk433-070-e 60w/jeita stk433-090-e 80w/jeita stk433-100-e 100w/jeita stk433-120-e 120w/jeita STK433-130-E 150w/jeita - p r e - v c c + v c c o u t / c h 1 + o u t / c h 1 - o u t / c h 2 + o u t / c h 2 - + p r e s u b ? g n d g n d i n / c h 1 n f / c h 1 s t a n d | b y n f / c h 2 i n / c h 2 123456789101112 13 14 15 16 171819 3ch class-ab 3ch classab/2.00mm stk433-230a-e 30w/jeita stk433-240a-e 40w/jeita stk433-260a-e 50w/jeita stk433-270-e 60w/jeita stk433-290-e 80w/jeita stk433-300-e 100w/jeita stk433-320-e 120w/jeita stk433-330-e 150w/jeita - p r e - v c c + v c c o u t / c h 1 + o u t / c h 1 - o u t / c h 2 + o u t / c h 2 - + p r e s u b ? g n d g n d i n / c h 1 n f / c h 1 s t a n d | b y n f / c h 2 i n / c h 2 i n / c h 3 n f / c h 3 o u t / c h 3 + o u t / c h 3 - 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 2ch class-h 2ch classh/2.00mm stk415-090-e 80w/jeita stk415-100-e 90w/jeita stk415-120-e 120w/jeita stk415-130-e 150w/jeita stk415-140-e 180w/jeita + v l - v l + o f f s e t - o f f s e t - p r e - v h + v h o u t / c h 1 + o u t / c h 1 - o u t / c h 2 + o u t / c h 2 - + p r e s u b ? g n d g n d i n / c h 1 n f / c h 1 s t a n d | b y n f / c h 2 i n / c h 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 3ch class-h 3ch classh/2.00mm stk416-090-e 80w/jeita stk416-100-e 90w/jeita stk416-120-e 120w/jeita stk416-130-e 150w/jeita + v l - v l + o f f s e t - o f f s e t - p r e - v h + v h o u t / c h 1 + o u t / c h 1 - o u t / c h 2 + o u t / c h 2 - + p r e s u b ? g n d g n d i n / c h 1 n f / c h 1 s t a n d | b y n f / c h 2 i n / c h 2 i n / c h 3 n f / c h 3 o u t / c h 3 + o u t / c h 3 -
STK433-130-E no. a1596-7/11 evaluation board characteristics [thermal design example for STK433-130-E (r l = 6 )] the thermal resistance, c-a, of the heat sink for total power dissipation, pd, within the hybrid ic is determined as follows. condition 1: the hybrid ic substrate temperature, tc, must not exceed 125 c. pd c-a + ta < 125 c ................................................................................................. (1) ta: guaranteed ambient temperature for the end product condition 2: the junction temper ature, tj, of each power tr ansistor must not exceed 150 c. pd c-a + pd/n j-c + ta < 150 c .......................................................................... (2) n: number of power transistors j-c: thermal resistance per power transistor however, the power dissipation, pd, for the power transistors shall be allocated equally among the number of power transistors. the following inequalities result from solving equations (1) and (2) for c-a. c-a < (125 ? ta)/pd ...................................................................................................... (1)' c-a < (150 ? ta)/pd ? j-c/n ........................................................................................ (2)' values that satisfy these two inequalities at the same time represent the required heat sink thermal resistance. when the following specifications have been stipulated, th e required heat sink thermal resistance can be determined from formulas (1)' and (2)'. ? supply voltage v cc ? load resistance r l ? guaranteed ambient temperature ta p o - v cc output power, p o /ch - w supply voltage, v cc - v pd - p o total power dissipation within the board, pd - w output power, p o /ch - w thd - p o p o - f output power, p o /ch - w frequency, f - hz total harmonic distortion, thd - % output power, p o /ch - w itf02725 10 20 40 30 70 50 60 t h d = 1 0 % t h d= 0 . 4 % itf02724 0 1.0 0.1 220 120 140 180 200 160 100 80 60 40 20 0 220 120 140 180 200 160 100 80 60 40 20 0 220 120 140 180 200 160 100 80 60 40 20 23 57 23 57 10 23 57 23 57 100 1000 itf02723 0.001 1.0 0.1 0.01 7 5 3 2 7 5 3 2 7 5 3 2 7 5 3 2 7 5 3 2 0.1 1.0 100 10 2 3 57 2 3 57 2 3 57 2 3 57 10 1000 100 r l =6 2ch drive ch1 measurement vg=30db rg=600 f=1khz tc=25 c v cc = 44v rg=600 2ch drive (same output rating) f=1khz vg=30db r l =6 tc=25 c v cc = 44v rg=600 2ch drive ch1 measurement vg=30db r l =6 tc=25 c f = 2 0 k h z f = 1 k h z itf02726 1k 10 100 2 3 57 2 3 57 2 3 57 2 3 57 10k 100k thd=10% thd=0.4% v cc = 44v vg=30db rg=600 tc=25 c r l =6 2ch drive ch1 measurement
STK433-130-E no. a1596-8/11 [example] when the ic supply voltage, v cc , is 44v and r l is 6 , the total power dissipation, pd, within the hybrid ic, will be a maximum of 130w at 1khz for a contin uous sine wave signal according to the pd-p o characteristics. for the music signals normally handled by audio amplifiers, a value of 1/8p o max is generally used for pd as an estimate of the power dissipation based on the type of continuous signal. (note that the factor used may differ depending on the safety standard used.) this is: pd 87w (when 1/8p o max. = 12.5w, p o max. = 150w). the number of power transistors in audio amplifier block of these hybrid ics, n, is 4, and the thermal resistance per transistor, j-c, is 1.6 c/w. therefore, the required heat sink thermal resistance for a guaranteed ambient temperature, ta, of 50 c will be as follows. from formula (1)' c-a < (125 ? 50)/87 < 0.86 from formula (2)' c-a < (150 ? 50)/87 ? 1.6/4 < 0.74 therefore, the value of 0.74 c/w, which satisfies both of these formulae, is the required thermal resistance of the heat sink. note that this thermal design exampl e assumes the use of a constant-voltage power supply, and is therefore not a verified design for any particular user?s end product. stk433-100 series standby control, mu te control, load-short protection & dc offset protection application 2 3 4 5 6 7 8 9 10 11 12 13 14 1 15 ch1 out gnd +v cc -v cc stk433-100 series st-by 56k gnd ch2 in gnd ch1 in +v cc ch1 in ch1 nf ch2 in ch2 nf ch2 out ch1 out -v cc sub gnd +pre st-by ch1 out ch2 out -pre 0.22 /2w 6.8k 56k 6.8k 0.22 /2w 56k 56k load short protection circuit 22k 56k 1k 0.1 f 10k 100k (*4) r2 1k 33k 2k (*1) 13k 33 f / 10v 10k 10k 10k 2.2k gnd ch2 out 82k 82k 100 k 22 f 22 f play mute st-by mute +5v +5v standby control mute control mute control h: single mute l: normal stand-by control (ex) h: operation mode (+5v) l: stand-by mode (0v) dc offset protection (*1) the current flowing into the stand-by pin (#13) must not exceed the maximum rated value (ist max). latch up circuit
STK433-130-E no. a1596-9/11 stk433-100 series application explanation the protection circuit application for the stk433-100sr consists of the following blocks (blocks (1) to (4)). (1) standby control circuit block (2) load short-circuit detection block (3) latch-up circuit block (4) dc voltage protection block 1) standby control circuit block (reference example) stk433-100 series test circuit (when +5v is applied to stand-by control.) concerning pin 13 reference voltage vst <1> operation mode the switching transistor in the bias circuit turns on and places the amplifie r into the operating mode when the current flowing into pin 13 (ist) becomes 0.25ma or greater. <2> standby mode when the current flowing into pin 13 (ist) is stopped (= 0ma), the switching transistor in the bias circuit turns off, placing the amplifier into the standby mode. ( * 1) the current limiting resistor (r1) must be used to ensure that the current flowing into the stand-by pin (pin 13) does not exceed its maximum rated value ist max. ( * 2) the pop noise level when the power is turned on can be reduced by setting the time constant with a capacitor in operating mode. ( * 3) determines the time constant at which the capacitor ( * 2) is discharged in standby mode. 2 3 4 5 6 7 8 9 10 11 12 13 14 1 15 out ch1 stk433-100 series 56k ist +v cc ch1 in ch1 nf ch2 in ch2 nf ch2 out(-) ch1 out(+) -v cc sub gnd +pre st-by ch1 out(-) ch2 out(+) -pre 0.22 /2w 6.8k 56k 6.8k 0.22 /2w 56k 56k (2) load short detection part 22k 56k 1k 0.1 f 10k 100k 1k 33k 2k (*1) r1 13k 33 f out ch2 82k 82k 100 k 22 f 22 f 1) stand-by control circuit part h: operation mode (+5v) l: stand-by mode (0v) point.b point.b point.c point.c tr1 tr2 stand-by circuit in pre driver ic sw transistor v be stand-by control voltage vst (*4) r2 i2 i3 (3) latch-up circuit part (4) dc offset protection tr4 tr5 tr3 tr5 tr6 -v cc 2 3 4 5 6 7 8 9 10 11 12 13 14 1 15 stk433-100series +v cc ch1 in ch1 nf ch2 in ch2 nf ch2 out ch1 out -v cc gnd +pre st-by ch1 out ch2 out -pre 1k (*3) 33k 2k (*3) (*1) r1 13k 33 f (*2) 1) stand-by control h: operation mode (+5v) l: stand-by mode (0v) vbe stand-by control voltage vst sink current ist sub vbe ex) stand-by control voltage=+5v ist=(vst-vbe*2)/r1 =(5-0.6*2)/13k 0 . 3( ma ) stand-by circuit in pre driver ic
STK433-130-E no. a1596-10/11 2) load short-circuit detection block since the voltage between point b and point c is less than 0.6v in normal operation mode (v be < 0.6v) and tr1 (or tr2) is not activated, the load short-ci rcuit detection block does not operate. when a load short-circuit occurs, however, the voltage between point b and point c becomes larger than 0.6v, causing tr1 (or tr2) to turn on (v be > 0.6v), and current i2 to flows. 3) latch-up circuit block tr3 is activated when i2 is supplied to the latch-up circuit. when tr3 turns on and current i3 starts flowing, vst goes down to 0v (standby mode), protecting the power amplifier. since tr3 and tr4 configure a thyristor, once tr3 is activated, the ic is held in the standby mode. to release the standby mode and reactivate the power amplifier, it is n ecessary to set the standby control voltage temporarily low (0v). subsequently, when the standby contro l is returned to high, the power amplifier will become active again. ( * 4) the i3 value varies depending on the supply voltage. determine the value of r2 using the formula below, so that i1 is equal to or less than i3. i1 i3 = v cc /r2 4) dc offset protection block the dc offset protection ci rcuit is activated when 0.5v (typ) voltage is applied to either "out ch1" or "out ch2," and the hybrid ic is shut down (standby mode). to release the ic from the standby mode and reactivate the power amplifier, it is necessary to set the standby control voltage temporarily low (0v). subsequently, when the standby control is returned to high (+5v, for example), the power amplifier will become active again. the protection level must be set using the 82k resistor. furthermore, the time constant must be determined using 22 //22 capacitors to prevent the amplifier from malfunctioning due to the audio signal. stk433-100 series btl application 2 3 4 5 67 8 9 10 11 12 13 14 1 15 +v cc -v cc stk433-100-e series out 10 0.1 3pf 56k 3pf gnd ch1 in 56k 470pf 2.2 +v cc ch1 in ch1 nf ch2 in ch2 nf ch2 out ch1 out -v cc sub gnd +pre st-by 100 100 stand-by control voltage vst ch1 out ch2 out -pre 100 /1w 3 0.22 4.7 3 /1w 0.1 /1w r l =8 56k 33 /1w 100
STK433-130-E no. a1596-11/11 ps this catalog provides information as of november, 2009. specifications and information herein are subject to change without notice. sanyo semiconductor co.,ltd. assumes no responsibil ity for equipment failures that result from using products at values that exceed, even momentarily, rated v alues (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-qua lity high-reliability products, however, any and all semiconductor products fail or malfunction with some probab ility. it is possible that these probabilistic failures or malfunction could give rise to accident s or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the us e of the technical information and products mentioned above. information (including circuit diagrams and circuit par ameters) herein is for example only; it is not guaranteed for volume production. any and all information described or contained he rein are subject to change without notice due to product/technology improvement, etc. when designing equip ment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control l aws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd.

▲Up To Search▲

Price & Availability of STK433-130-E

	To Download STK433-130-E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .